Cabinet settings

Vanity base configuration

Project name

Dimensions

Width

Finished height (incl. top)

Depth

Vanity top thickness

Cabinet carcass height: 34.500″. Structural body depth: 21.000″ (overall depth includes any face frame). Countertop is excluded from the plywood cut list.

Construction

Cabinet type

Sheet thickness

Top runner depth

Fronts

Door style

Shaker rail/stile width

Panel groove depth

DoorsDrawer / false fronts

Door overlay

Overlay allowance

Toe kick

Construction method

Toe-kick height

Finished face recess

Fascia thickness

Structural notch cut depth: 3.750″ = 3″ recess + 0.75″ fascia . Finished fascia now spans the full cabinet width.

Estimating

4×8 sheet price ($)

Prototype geometry only. Open-top front/rear runners replace the full plywood top. Frameless inset fronts use a 7/8-inch setback for the front runner and bottom panel to clear 3/4-inch fronts. Face-frame cabinets with drawers above doors now have a middle divider rail; verify separate drawer-slide blocking and attachment against your selected hardware. Sink clearances and structural sizing must be verified. Notch dimensions are exported but notch cutouts are not deducted from material estimates. Adjustable feet and illustrative concealed hinges are now counted. Verify dimensions before cutting. Shaker doors and drawer/false fronts generate separate hardwood rails and stiles plus quarter-inch plywood panels; short fronts may use narrower rails. Rail lengths exclude joinery tenons; add machining allowances and waste. Panel dimensions include groove insertion. Raised-panel doors and drawer/false fronts are purchased by finished size and excluded from hardwood totals. Hardware models and raised-panel previews are simplified; confirm hinge/mounting plate selection, overlay, swing, drawer clearance, joinery, and plywood nesting before manufacturing.

3D PREVIEW

Vanity Base 01

36″ W × 36″ finished H × 21″ overall D

Loading 3D viewport…

Parts modeled25

Sheet area21.1 sq ft

Area-only sheet minimum1

Area-only sheet cost$95

MANUFACTURING

Preliminary part list

Dimensions in inches. Grouped by material. Identical parts share a row and quantity; hover to highlight all matching pieces. Not optimized for nesting or joinery.

Hardwood requirements by stock width

Net lineal feet at the specified finished width and thickness, before waste, trimming, tenons or machining allowances.

Stock width	Thickness	Pieces	Net lineal feet
2.250″	0.750″	12	18.67 ft
4.000″	0.750″	1	3.00 ft

Part	Material	Qty	Length	Width	Thickness	Notch
0.25" plywood · 3 pieces
Drawer front 1 recessed plywood panel	0.25" plywood	1	3.125″	32.25″	0.25″	—
Shaker door center panel	0.25" plywood	2	19.625″	14.188″	0.25″	—
0.75" plywood · 5 pieces
Bottom panel	0.75" plywood	1	21″	34.5″	0.75″	—
Cabinet side	0.75" plywood	2	34.5″	21″	0.75″	4″ H × 3.75″ D
Top support runner	0.75" plywood	2	3″	34.5″	0.75″	—
Hardware · hinges · 4 pieces
Frameless concealed hinge (full overlay)	Hardware · hinges	4	—	—	—	—
Hardwood · 13 pieces
Door rail	Hardwood	4	2.25″	13.438″	0.75″	—
Door stile	Hardwood	4	23.375″	2.25″	0.75″	—
Drawer front 1 rail	Hardwood	2	2.25″	31.5″	0.75″	—
Drawer front 1 stile	Hardwood	2	6.875″	2.25″	0.75″	—
Solid-wood toe-kick fascia	Hardwood	1	4″	36″	0.75″	—